The blade is made of  T10 Tool steel and features an elegant gunome hamon pattern with the medium amount of niku. The Ko-kissaki  polished with a yakizumi boshi that does not turn back towards the spine. The tsuka or handle is double mekugi pinned and has real samegawa or rayskin panels and is wrapped with dark brown ito with brass  menuki. Featuring deluxe fittings with solid blackened brass fuchi and kashira, a blackened good quality brass Musashi style tsuba and an elegantly appointed black lacquered saya.

Features 

• Blade: The blade of the sword has been constructed hand forged differentially hardened from T10 Tool steel  Steel in a Maru Lamination with real yokote.
• The blade comes full tang and Razor Sharp.
• Saya: The Koi-guchi has been reinforced with Buffalo horn .
• Tsuba: The Tsuba begins with a one piece brass construction double layers habaki. Two brass Seppas secure the blade of the sword. The Tsuba is  blackened brass.
• Tsuka: The Fuchi is blackened brass with genuine Same (ray skin) and brown Synthetic Silk Ito Tsukamaki with hishigami.
• Blade: Very Sharp
• Nagasa Length: 71 Cm
• Blade Material: T10 Tool steel
• Polish : Traditional polishing with wet stone.
• Tsuka Length: 29 Cm
• Blade Construction: Maru lamination
• Tsuba Material: Handmade Casting Brass.
• Hardness of Yakiba: 59 HRC
• Hardness Shinogi Ji : 40 Hrc
• Ito Material:Shintetic Silk
• Sageo : Synthetic Silk  Sageo
• Fuchi Kashira Material: Brass

 Price   : Rp.4.700.000
Status : Sold Out

    The blade of the Nami katana is hand forged ,is made ​​of T10 tool steel in a Maru lamination. The blade is hardened differential to the sword to make strong but flexible. The sword had to be able to take on bamboo or multiple mats and still be able to perform complex trick cuts.

Features 

• Blade: The blade of the sword has been constructed hand forged differentially hardened from T10 Tool steel  Steel in a Maru Lamination with real yokote.
• The blade comes full tang and Razor Sharp.
• Saya: The Koi-guchi has been reinforced with Buffalo horn and Coopper.
• Tsuba: The Tsuba begins with a one piece brass construction double layers habaki. Two brass Seppas secure the blade of the sword. The Tsuba is  black iron.
• Tsuka: The Fuchi is blackened iron  with genuine Same (ray skin) and brown Synthetic Silk Ito Tsukamaki without hishigami.
• Blade: Very Sharp
• Nagasa Length: 71 Cm
• Blade Material: T10 Tool steel
• Polish : Traditional polishing with wet stone.
• Tsuka Length: 28 Cm
• Blade Construction: Maru lamination
• Tsuba Material: Handmade Casting Iron
• Hardness of Yakiba: 59 HRC
• Hardness Shinogi Ji : 40 Hrc
• Ito Material:Shintetic Silk
• Sageo : Synthetic Silk  Sageo
• Fuchi Kashira Material: Iron

 Price   : Rp.4.000.000
Status : Out Of Stock

       The blade of the Nagatake tamewari katana is hand forged , is made ​​of T10 tool steel in a Maru lamination. The blade is hardened differential to the sword to make strong but flexible. The sword had to be able to take on multiple mats and still be able to perform complex trick cuts.

Features 

• Blade: The blade of the sword has been constructed from T10 Tool steel  Steel in a Maru Lamination with real yokote.
• The blade comes full tang and Razor Sharp.
• Saya: The Koi-guchi has been reinforced with Buffalo horn.
• Tsuba: The Tsuba begins with a one piece brass construction Habaki. Two brass Seppas secure the blade of the sword. The Tsuba is  black iron.
• Tsuka: The Fuchi is blackened iron  with genuine Same (ray skin) and brown Silk Ito Tsukamaki use hishigami. Two Bamboo Mekugi secure the tang of the sword into the Tsuka, while bright copper Menuki decorate each side of the Tsuka.
• Blade: Very Sharp
• Nagasa Length: 72 Cm
• Blade Material:T10 Tool steel
• Polish : Uchigumori .
• Tsuka Length: 29 Cm
• Blade Construction: Maru lamination
• Tsuba Material: Handmade Casting Iron
• Hardness of Yakiba: 59 HRC
• Hardness Shinogi Ji : 40 Hrc
• Ito Material:Shintetic Silk
• Sageo : Synthetic Silk Shigeuchi Sageo
• Fuchi Kashira Material: Copper
• Mekugi: Smoked Bamboo Double Mekugi

Price   : Rp.4.700.000
Status : Out Of Stock

   The Sensei Edition Tora Katana  is a handforged and handcrafted sword with an extraordinary blade and with high quality fittings. The blade is forged out of T-10 tool steel and differentially hardened to produce a stunning hamon on the blade.

Features

• Blade: The blade has been constructed of differentially hardened T-10 steel with kobuse lamination.
• Saya: The saya of the sword is wooden with a black high gloss finish , bull horn koiguchi and partial samegawa rayskin wrap. The sageo is shigeuchi and tied over brass shitodome.
• Koshirae: The habaki is made of brass and features a leaves decorative pattern. The tsuba is High quality handmade tiger themed style with silver accented leaves on the handle side. The tsuka has genuine white samegawa ray skin with black chemical fiber ito which is tied in hineri-maki with hishigami,and double pegged with smoked bamboo.
• Blade:Sharp
• Blade Length: 72 Cm
• Blade Material: T10 tool steel/1045 carbon steel
• Tsuka Length: 29 Cm “
• Hardness: 59 HRC 40 HRC
• Fittings: Brass & Copper
• Blade Thickness: 0.7″
• Handle Material: Ray Skin & Silk Cord

Price : Rp.6.300.000

Status : Out Of Stock

  This is Octagonal  Shirasaya. The blade has been beautifully crafted from forge folded differentially hardened T10 tool steel. The blade wide size capable of medium and hard traditional targets.The kissaki is O-kisaki design with a clean turn back in the boshi. the saya is wooden with natural style finish. The koiguchi and kojiri are horn.

Features

• Overall Length:101 Cm
• Nagasa Length:72Cm
• Tsuka Length: 29Cm
• Blade Material: Hand Forge Folded Differentially Hardened T10 Tool Steel
• Blade: Very Sharp
• Lamination: Maru
• The Tsuka features double pinned mekugi made from horn
• Polishing : Traditional polish use wet stone
• HRC: 59 Degrees
• Accessories: Silk Swords Bag.

Price   : Rp.4.200.000
Status : Out Of Stock

  Sensei Edition Yagyu – Onami Koshirae katana is made from hand-forged from T10 tool steel with sanmai lamination, clay-tempered to create a sword worthy of being called a performance cutter.  The blade is fitted in a wave theme throughout with dragon sea Menuki. The Tsuka is wrapped in black synthetic silk Ito use hishigami and the Saya is finished in a black gloss lacquer with rayskin.The blade comes full tang and very sharp.

Features

• Blade Lenght : 72 Cm
• Handle Lenght : 29 Cm
• Blade Material : T10 tool steel + 1045 carbon steel
• Blade: The blade of the sword has been forged  using T10 tool Steel  in a Sanmai lamination.
• The tip of the blade is real kisaki temper line.
• Saya: The Saya is wooden with a high gloss black finish with one-third rayskin. The Sageo is black  a Shigeuchi. Koiguchi- kurikata and kojiri made from horn.
• Tsuka: The Tsuba is handmade casting iron with wave design.The tsuka features rayskin samegawa lacquered white and black synthetic silk Ito.
• Fittings: Casting Iron
• Polish : traditional polish use wet stone.
• Hardness: 41- 60 Degree

Price   : Rp.6.000.000
Status : Out Of Stock

 “Tsuru” (Crane) – For thousands of years the Japanese culture has treasured the crane as a symbol of honor and loyalty.The crane symbol is used on many Japanese heraldic devices and is a theme in many famous works of art. It is a majestic bird which mates for life and is extremely loyal to its partner. The bird is strong, graceful and beautiful. Because of the great importance of the crane, the Japanese people feel that a person who folds 1,000 paper cranes will be granted his or her greatest wish. The blade of the Tsuru sukashi tamewari katana is hand forged , is made ​​of T10 tool steel in a Maru lamination. The blade is hardened differential to the sword to make strong but flexible.

Features

• Blade: The blade of the sword has been constructed from forged  differentially hardened T10 tool steel .
• Blade Material: T10 tool steel.
• Saya: The Saya is wooden with a high gloss black finish with one-third rayskin. The Sageo is black  a Shigeuchi . Koiguchi- kurikata and kojiri made from horn.
• Tsuba: The tsuba is Iron.
• Tsuka: The habaki is brass .The fuchi-kashira are handmade copper with higo nut design and crane menuki made from brass. The tsuka core is wooden with white samegawa and black silk ito use hishigami. The tsuka features a two pinned bamboo mekugi.
• Tsuka Length: 29Cm
• Fittings: Handmade Copper.
• Overall Length: 106Cm
• Blade: Razor Sharp
• Blade Length: 72Cm
• Lamination : Maru
• Polish : Traditional polishing use wet stone
• Hardness: 41-60 degree

Price   : Rp.4.600.000
Status : Out Of Stock